Description

10 Meetups About Ghost Ii Immobiliser You Should Attend
Ghost II Immobiliser

Secure your vehicle from hacking, key-cloning, and car theft. It is silent and undetectable by potential thieves because it doesn't use LED indicators or key-fobs to alert thieves to its presence.

It can also be temporarily disabled with Transport Mode for scenarios like vehicle transportation or when your vehicle is being repaired.

Simple Change of PIN Code

Ghost is a revolutionary next-generation security device that can protect your vehicle without cutting wires or installing aftermarket alarm or immobiliser key fobs. It is directly connected to the vehicle's CAN Data Network and a personalised PIN Code can be programmed in it by using the buttons that are factory-installed on the steering wheel and dash. This code will stop the engine from starting and is not detected by any RF scanning technology or code-grabbing technologies used today.

The system has an emergency pin code override, in the event that a user forgets his/her code or the programming key is lost. It also has a Service/Valet Mode that allows the vehicle to be temporarily started and driven without the need for an active code, making it ideal for transport or maintenance.

While the UK automotive aftermarket is flourishing, it's still not invincible to theft. The OBD port in your vehicle can be hacked by thieves in order to bypass most traditional deterrents like locking your steering wheel and wheels. This can be done using an laptop, a USB cable, and a low-cost OBD scanner that can be purchased online for under PS50.

It is important to protect your car with a Ghost ii immobiliser to stop theft. It's a discrete device that can help to prevent vehicle theft, and it's easy to use once you've got your PIN number. The device is contained inside a small box and can be installed within the wiring harness of your vehicle. It can be placed anywhere on your vehicle and is weatherproof. This makes it hard for thieves to find. It is also simple to install and is with a money-back guarantee.

Weatherproof small device

The device connects to the CAN data network in your vehicle without cutting cables and works quietly. The device can be programmed to have an individual PIN by using the buttons on your dashboard and the steering wheel. This can prevent theft. The device also has an built-in GPS tracker. It can be activated via an app on your phone and is recommended by several insurance companies for cars. It is weatherproof and can be concealed inside the car so that it is nearly impossible for thieves to steal.

Contrary to traditional systems, which can be detected by criminals, the ghost ii operates silently and requires between 4 and 21 button pressings of the vehicle's buttons. The owner of the vehicle can modify the sequence to their liking and it is not able to be hacked. There is a mobile app that can be used to deactivate the system. If you are selling your vehicle, there is also an master reset code that can reset the immobiliser CAN bus.

Modern thieves employ diagnostics to detect circuit breakages on modern vehicles. The Ghost, however, does not possess any. Our CANbus fitters can install this system on the vehicle with confidence.

The Ghost is compatible with any vehicle, unlike other CANbus immobilisers which may require a key fob. The technology behind it is so advanced that it can protect against a range of security threats, including signal relay attacks as well as ECU swapping. It is compatible with many smartphones and can issue notifications to owners when their vehicle is being driven in a way that is not authorized.

Each vehicle is tested

Ghost is the only immobiliser on the market that protects your vehicle from key hacking, key cloning and even theft of keys. To steal a vehicle that is protected by Ghost, a thief must physically remove the device and take it to a trailer. It also shields against the use of wheel locks, jumper cable and universal keys.

ghost 2 immobiliser review to install system operates silently and connects to the vehicles CAN data circuit, making it possible to communicate directly with the ECU (Engine Control Unit). It is so small and sealed that it can be put in anywhere in your vehicle.

Once installed it prevents the vehicle from starting unless the unique disarm sequence is entered using the buttons on your vehicles steering wheel, door panels or central console. It can be set up to 20 digits and allows you to choose the level of security you wish to be. You can also use it to enable the service/valet mode that allows you to temporarily start your car and drive it without entering your PIN.

It uses a CAN data circuit, which means that there are no radio frequencies like an immobiliser that is traditional. This means that a burglar cannot listen to the relay and try to figure out the PIN code being entered. Also, it doesn't have circuit cuts and can't be detected by diagnostics tools or by RF scanning or code-grabbing technology.

Boundary Car Care is proud to be an approved installer of this amazing product. We are very impressed with its performance and the peace-of-mind it provides our customers. It is a great way to safeguard your happiness and pride in these challenging times.

Emergency Pin Code override

The Ghost immobiliser is a weatherproof and tamperproof device that blocks your vehicle from starting if you don't have the correct PIN code entered. It is concealed within the wiring harness of your vehicle. It utilizes the buttons on your steering wheel / dashboard to generate an individual code sequence that needs to be entered to start your vehicle. It's not a Thatcham device, as it doesn't use LED indicators and is connected to your vehicle through the CAN system. This makes it impossible to track by professional thieves who can detect alarm/immobiliser systems in modern vehicles by using readily available diagnostic tools.

Inputting an emergency override on the app on your smartphone will temporarily disable your Ghost immobiliser. This allows you to loan your vehicle to a friend, family member or valet without sharing your pin number and is ideal for situations like servicing, or if you have to leave your car with a garage or valet parking.

Ghost can be used with the driver fob. This lets you start your car using your key or through the app. This is a great option for when you want to hand your child the keys to the car or if you can't input the pin number in a quick manner.

With an easy PIN change procedure, a user-friendly interface, and a variety of security features, there's no wonder why the Ghost immobiliser is endorsed by a variety of insurers and is backed up by a security warranty. Its sleek slim design and seamless integration with the vehicle's existing systems make it an essential addition to any high-performance or classic automobile.

Service/Valet Mode

The Ghost immobiliser is able to prevent theft of vehicles by blocking communication between the key and the ECU. This means the engine cannot be started without a PIN number that is unique to the. It's also hidden in the wiring allowing it be hidden from view and doesn't have LED indicators that could indicate its presence. This is ideal when you need to hand over your vehicle to valet parking or mechanic. To activate valet mode, enter the code that was provided to you by your engineer at the completion of installation - this will allow the car to start without the need to enter the disarm sequence. To exit valet mode, return your car to normal operation and the code will automatically change to your normal pin.

Contrary to other security products that rely on the vehicles buttons or key-fobs, Ghost is designed to be integrated into your vehicle's CAN bus system. This provides it with unrivaled security against modern methods of theft such as key cloning or hacking.

Once installed the engineer will demonstrate how to arm, dearm, and clean your vehicle. All of this can be done via your smartphone app. Your engineer will set your unique pin which is easy to remember and mathematically impossible for thieves to guess, but in the event that you forget it don't fret because every installation comes with an Emergency PIN Code override that will let you get your vehicle back in action.


Our installers have been trained and certified to install your Ghost correctly. Installations are completed on the premises of the customer. We also provide instructions on how to use the device as well as a mobile application. Once your Ghost has been installed, we assure its performance for the duration of time.